Electrical analysis

電性分析

首頁 >  專業技術 > 分析儀器 >

電性分析

Electrical analysis

SM系列中之高階機種,量測範圍可達2x10^16Ω(1000V)。

High-end models in the SM series, measuring range up to 2x10^16Ω (1000V)

Insulation resistance test
Insulation resistance test

Application: High-end models in the SM series, measuring range up to 2x10 ^ 16Ω (1000V). The test voltage covers low voltage and high voltage, which can correspond to a full range of insulation analysis. Model: HIOKI SM-8220

press to zoom
CTI Comparative Tracking Index
CTI Comparative Tracking Index

Application: Under the effect of moisture and impurities, the electrical products may be charged between parts with different polarities, live parts and grounded metal. The generated arc causes a short-circuit to the electrical appliance or the material is electrically damaged by the discharge, or even caused by ignition fire. The tracking test is a destructive test on the insulation material for the above situation to measure the solid electrical. Its use for measure the relative electrical tracking resistance of solid electrical insulation materials when the surface is exposed to water containing impurities under the action of an electric field. Model: ZLT-LDQ

press to zoom
Dielectric strength tester
Dielectric strength tester

Application: Test the dielectric strength and withstand voltage properties of the material under AC voltage or DC voltage. Model: Center testing international, HCDJC-100KV

press to zoom
Arc resistance tester
Arc resistance tester

Application: Testing uses 12.5kV high voltage arc to detect changes in the surface of the material. Model: Center testing international, HCDH-4

press to zoom
Dielectric analyzer
Dielectric analyzer

Application: Dielectric constant, Tanδ of test materials at different voltages (100V ~ 5000V), different temperatures Model: Center testing international, QS37A

press to zoom
Electrical of volume and surface resistivity tester (megohmmeter)
Electrical of volume and surface resistivity tester (megohmmeter)

Application: The surface resistance of the test material at different temperatures under different DC voltages (10V, 50V, 100V, 250V, 500V, 1000V), Volume resistance. Model: Center testing international, HEST-300

press to zoom
超阻抗絕緣計
超阻抗絕緣計

用途: SM系列中之高階機種,量測範圍可達2x10^16Ω(1000V)測試電壓涵蓋低壓及高壓,可對應全範圍絕緣分析。 機型: HIOKI SM-8220

press to zoom
漏電起痕試驗儀 (CTI  Comparative Tracking Index)
漏電起痕試驗儀 (CTI Comparative Tracking Index)

用途: 在電器產品受潮濕和雜質的影響下,不同極性帶電部位之間或帶電部件與接地金屬之間可能會引起絕緣上的漏電,產生的電弧對電器造成擊穿短路或由於放電使材料電蝕損,甚至起燃導致火災。漏電起痕試驗就是針對上述情況對絕緣材料進行的一種破壞性試驗,用以測量固體電氣絕緣材料在電場作用下表面暴露於含雜質的水時的相對耐電痕化性能。 機型: ZLT-LDQ

press to zoom
介電強度試驗儀
介電強度試驗儀

用途: 測試材料在交流電壓或直流電壓下介電強度和耐電壓性質。 機型: 華測儀器.HCDJC-100KV

press to zoom
耐電弧試驗儀
耐電弧試驗儀

用途: 測試材料在12.5kV高壓電弧下,材料表面變化。 機型: 華測儀器.HCDH-4

press to zoom
介電分析儀
介電分析儀

用途: 測試材料在不同電壓(100V~5000V)、不同溫度下的介電常數、Tanδ 機型: 華測儀器.QS37A

press to zoom
體積、表面電阻率測定儀(高阻計)
體積、表面電阻率測定儀(高阻計)

用途: 測試材料在不同直流電壓(10V、50V、100V、250V、500V、1000V)不同溫度下的表面電阻、體積電阻。 機型: 華測儀器.HEST-300

press to zoom