Bản đồ
首頁 > 產品 >成功案例>
Chúng tôi chuyên về Epoxy, Photo-Curing, Silicone sửa đổi, Acrylic & UV PSA Resin
High-Level Traditional Industry
高階傳產
高階傳產
High-Level Traditional Industry
永寬所有產品均依據相關工業要求的標準而設計,並依照客戶需求進行一連串的環境模擬測試。在玻璃藝品接著應用,為因應水晶飾品及世界最大的遊樂園的紀念品,還有歐美各地的精緻玻璃杯,紅酒杯,香檳杯等等的本地的代工廠商,開發一系列具耐水性、耐黃變性且接著力強的接著劑。而在玻璃傢俱接著應用,永寬的產品已經在行業有十年以上的應用經驗,所以面對傢俱應用的異材接著也有一定的可信賴度,金屬材質可以適用的有鋁塊、鐵材、不鏽鋼、銅材,與玻璃接著後,進行破壞測試都可以達到材破的程度。在特殊塑膠杯接著應用,本系列產品已生產超過五年,由於PC質韌,做破壞測試時較難材破,但做把手拉力測試時可達100kgf/cm2,在接著壓克力、PS、AS、MS等材料時,只要選擇適當接著劑並確保壺把內的UV樹脂完全乾燥,進行破壞測試時通常可達到材破。
Since established in 2000, Everwide Chemical was started by traditional industries development applications. Because the Christmas art, glass art, glass & metal furniture, etc. At that time were all made of imported rubber. The local industry chain has the problem of high cost and long period of inventory, etc. Everwide Chemical committed to develop the products for the local industry. It has benefit and creates a win-win situation. All products of Everwide Chemical are according to the standards of relevant industrial requirements to designed, and have a series of environmental testing which are customer requirements.
We develop a series of glass bonding. These products exhibit water resistance, resistance to yellowing and excellent adhesion strength. This adhesive target is the local original equipment manufacturer which is made crystal jewelry and souvenirs in the world's largest amusement park, as well as exquisite glasses, red wine glasses, champagne glasses, etc.
Everwide Chemical products has more than ten years of experience in glass furniture adhesive, so the glass furniture adhesive of different materials is reliable. Metal materials can use in aluminum, iron, stainless steel, copper. After bonding the glass destruction testing could make the material breakage. In a special plastic cup adhesive, this series of products has been produced for more than five years. It’s not easily to make the material breakage in the destruction testing due to the PC texture is tough, but in handle tensile testing is up to 100kgf/cm2. When bonding materials such as acrylic, PS, AS, MS, etc. Choose the appropriate adhesive and confirm the UV resin in the pot is completely dried, and it usually makes the material breakage in the destruction testing.