Physical properties analysis
物理特性
物理特性
Physical properties analysis
測量樹脂內各組成的分子量分佈，用於分析、品管樹脂的組成物。
The molecular weight distribution of each constituents in the resin is measured and analyzed.
Application: Suitable for plastics, glass, ceramics, paint films, non-conductive coatings of abrasion resistance measurement. Metal substrates (Aluminum–magnesium alloys, Aluminum -Rim, Sheet metal junction box), non-metallic substrate (Plastic injection molding, Mobile phone case, Laptop, office machine, consumer electronics product packaging, Appliances, automobiles, PC screen printing ink, and other abrasion test. Counter 0-9999 times, stroke 10-50mm, Adjustable 60 times per minute, load weight 10/20/25/50/100/200/500g. Optional: artificial sweat, 95 degrees ethanol (test alcohol), Emery cloth test, Eraser strips (EF # 74 Pink for Pencil), Grinding head steel wool (Made in Taiwan)
Application: The Erichsen cupping tester is an instrument used to determine the cold stamping deformation performance of sheet metal and strip. A punch with a spherical end is punched against a specimen clamped in the pad and the film to form a dent until a penetrating crack occurs. The depth of the dent measured by the displacement of the punch is test results. That is a steel ball or a spherical punch of a certain specification is used to apply pressure to a specimen with a clamping force of 10 kN in the periphery until the specimen has a penetrating crack. At this time. the depth of the punch (mm) is the thickness of the sheet. Cup bump value. This cup bump value is used to judge the plastic deformation performance of the material. The punch cup test is to make a thin plate and strip of wafer (Ø60) specimen pressed between the blank holder and the die. Under the action of the punching force applied by the punch, it stretches and bends plastically in the radial direction and is drawn once. A cylindrical cup is used to determine the anisotropy of the material, which is marked by the ear-making rate.
Application: Measure the moisture content of the constituents and products in resin. Model: METROHM Ltd. 701 KF Titrino
Application: It can measure pH, mV and ℃. PH: -2.00 ~ 16.00 mV: ± 200.0 / 2000 mV Temp: -10.0 ~ 110.0 ℃. High performance design, the resolution can reach 0.01pH, PH: 0.01 mV: 0.1 / 1 mV Temp: 0.1 Large LCD liquid crystal display screen. It can display pH and ℃ at the same time, and the limit amount of data is 50. Model: EUTECH CyberScan pH 11
適合塑膠, 玻璃, 陶瓷, 漆膜, 非導體塗層耐磨擦測定, 金屬底材(鋁鎂合金, 鋁合金鋼圈,板金業配電箱), 非金屬底材(塑膠射出成形, 手機外殼, 筆記型電腦, 事務機器, 消費性電子產品包裝, 家電, 汽車, PC網版油墨)...等耐磨擦測試,. 計數器0-9999次, 行程10-50mm, 每分鐘60次可調, 荷重砝碼10/20/25/50/100/200/500g, 可選購: 人工汗水, 95度乙醇 (測試酒精), 測試砂布, 橡皮擦規格(EF#74 Pink for Pencil), 鋼絲絨磨頭 (台灣製造)
所謂杯突試驗用於測定金屬板材和帶材的冷沖壓變形性能的試驗的儀器。將一個端部為球形的沖頭對著一個被夾緊在墊模和壓膜內的試樣進行沖壓形成一個凹痕，直到出現一條穿透裂紋，沖頭位移測得的凹痕深度即為試驗結果。即用一定規格的鋼球或球狀沖頭，向周邊具有10kN夾緊力的試樣施加壓力，直到試樣產生穿透裂縫為止，此時沖頭壓入深度（mm），即為板材的杯突值，此杯突值用來判斷材料的塑性變形性能。衝杯試驗是使薄板、帶材的圓片（Ø60 ）試樣壓緊於壓邊圈與沖模之間，在沖頭施加的衝力作用下，沿徑向產生延伸及彎曲塑性變形而一次拉延成圓柱杯，用來測定材料以製耳率為標誌的各向異性。
測量樹脂各成份及產品的水份含量 機型: METROHM Ltd. 701 KF Titrino
用途: 可測定pH、mV及℃ ,PH:-2.00~16.00 mV:±200.0/2000 mV Temp:-10.0~110.0 ℃ 高性能設計，解析度可達0.01pH ,PH:0.01 mV:0.1/1 mV Temp:0.1 ℃ 大型LCD液晶顯示幕，可同時顯示pH及℃,可儲存資料筆數達50筆 機型: EUTECH CyberScan pH 11