DSC09272-1_edited.jpg

Products

Home> Products> Industrial Products

We specialize in Epoxy, Photo-curing, Silicone & MS resin.

 

Products

EPOXY.jpg

Epoxy resin

Customized service of epoxy resin adhesives has become a major advantage of Everwide

 
 
濕氣硬化型-1_edited.jpg
Modified and Special Silicone

In the natural state, the use of moisture against plastic materials has outstanding performance.It can make up the weakness of the general silicone on the plastic.It is a very high CP material

 
UV PSA

Ultraviolet Pressure Sensitive Adhesive (UV PSA) exhibits high-temperature and high-tacky stability. It applies to the adhesive tapes, and it is used for various fields by various thicknesses. After UV curing, it has a high transmittance, high flexibility, and high tacky. This product has an excellent tacky, good adhesion, environmentally-friendly, and maintains a high-temperature (70°C) to replace the traditional solvent-based PSA.

all-group-uvPSA.jpg
 
DSC06301.jpg

Acrylic Resin

The two-component acrylic-based adhesive is curing at room temperature. No special surface treatment is required. It only takes about 24 hours to complete the bonding surface. It can bond with the different substrates, especially low surface energy materials such as polyamide (PA), polypropylene (PP), polyethylene (PE), and thermoplastic polyolefin (TPO).

 

Thermal Material

It can endure thermal expansion and stress change without removal or separation for a long time. The products of Everwide, mainly applied to various components and modules requiring adhesion and thermal conductivity, can still maintain their adhesion and thermal conductivity even under strict operation and test conditions.

DSC00182_edited.jpg