Everwide newsletter No.490

Experiment § Single-Component Water-Based Textile Adhesive

Since the Industrial Revolution, technological advancements have brought significant progress but have also created irreversible environmental challenges. In recent decades, growing environmental awareness has driven the polymer materials industry to seek renewable raw materials from nature. Water-based polymers are also an environmentally friendly alternative with low VOC (volatile organic compound) emissions. Unlike conventional solvent-based materials, water-based polymers primarily dry and cure through water evaporation, followed by crystallization, significantly reducing the environmental impact and exposure risks to operators. The NH268 series is a water-based adhesive suitable for bonding textiles and wood. Compared with common water-based adhesives on the market, this series exhibits distinct thixotropic properties (Figure 1), allowing the required amount of adhesive to remain on the bonding surface without penetrating the underlying fabric or causing adhesive retraction. It also offers excellent fast-drying properties and initial tack. After application, the adhesive can be left open at room temperature for 5–15 minutes to allow partial water evaporation before bonding. No additional pressure or fixation is required after bonding, as the fabric remains in place without slipping (Figure 2). After curing at room temperature for 24 hours, the adhesive achieves its optimal bond strength of 13.4 kgf. The cured adhesive layer also exhibits excellent water resistance (Figure 3). Even after 24 hours of water exposure, while the adhesive layer remains wet, approximately 82% of the bond strength is retained. After the wet adhesive layer is further dried, the bond strength returns to 13.4 kgf. — Author: Mr. Hsu Ping-Chen
About Us § 2026 TTQS Evaluation

Employee development is fundamental to the company’s progress. We hope to continuously improve our employees’ knowledge, skills, and attitudes through learning. In this year’s TTQS evaluation, Everwide once again received the Bronze Award, achieving a score three points higher than the previous evaluation and earning recognition from the evaluators. Over the past two years, we have continued to participate in training courses and apply for the Training and Development Program and consulting resources to further improve our system. Everwide offers more than 100 professional training courses each year and invests considerable time and resources in talent development. Applying what we learn to our work remains an area in which we continue to strive for improvement.
Knowledge § Why Is LDPE Used to Package Anaerobic Adhesives? (2)
The stabilizer in anaerobic adhesives requires oxygen to function. As a result, the oxygen in the adhesive is gradually consumed during storage. If oxygen is not replenished in time, the anaerobic adhesive may still undergo curing. LDPE (low-density polyethylene) bottles are used to package anaerobic adhesives because this type of plastic has relatively high oxygen permeability, allowing oxygen from the outside to permeate through the bottle wall and replenish the oxygen inside. When anaerobic adhesives leave the factory, the bottles are intentionally filled to only 60–70% of their capacity, leaving additional headspace to facilitate oxygen dissolution into the adhesive and improve its stability. In some expired anaerobic adhesives, the material near the bottle wall remains liquid, while the material in the center has cured. This demonstrates the effect of oxygen permeating from the outside toward the center.
Living § Sugar-Propellant Rocket Competition

Playing with rockets amid the vast blue skies of the East Rift Valley is a uniquely relaxing experience. From June 25 to July 1, Taitung County held its first sugar-propellant rocket competition for elementary and junior high school students in beautiful Chishang. As the first competition of its kind in Taiwan, the event challenged both the organizers and participants in teamwork and technical skills. Principal Lin Su-Hui of Luanshan Elementary School opened the event with a creative rocket-painting activity, followed by Principal Kuo Liang-Yuan of Fuyuan Elementary School and Principal Su Yi-Yuan of Chishang Junior High School, who organized the elementary and junior high school competitions, respectively. Everwide Chemical provided the competition materials and assigned R&D staff members Dr. Yeh Cheng-Yang and Engineer Shih Yao-Wei as judges for the elementary school division. I served as a judge for the junior high school division. The competition was judged on three criteria: the propellant had to ignite without causing an internal explosion; the rocket had to fly straight upward; and the parachute had to deploy and fully open before landing. There is an English saying used to describe something extremely difficult: “It’s rocket science.” For elementary and junior high school students, this was certainly a challenging task. Each small rocket carried the students’ enthusiasm from three days of activities, bringing laughter, excitement, suspense, and the distinctive scent of rocket propellant to the beautiful skies of Chishang. — Author: Ms. Lin Miao-Ling




Finding something that speaks directly to your situation feels like luck, and I’m grateful for it here. This relevant article treats the subject with care, covering the essentials without drowning the reader in detail. The writing is friendly, direct and easy to follow even when the topic gets technical. I noticed how the author used real-world examples to make each point concrete. Those examples did more for my understanding than pages of theory could have. I’ve saved the post so I can return to it whenever I need a refresher. Thank you for the clarity.